Characteristics

/ Kraft LED - general information and technical specifications

KRAFT Led - economical lighting system for suspended ceilings

Innovative LED lights KRAFT LED were created specifically for suspended ceilings. One of the features of KRAFT LED luminaires is that they can be used for any type of suspended ceilings, as well as for the modernization of the lighting system in already operated premises.

Main advantages of KRAFT Led lighting system

1. Separate suspensions are not required. As a rule, when the weight of the lamp is more than 250 g, it requires a separate suspension. LED profile KRAFT LED is installed on a suspended ceiling without the use of additional components.

2. The ability to install fixtures anywhere in the suspended ceiling.

3. Easy installation. The KRAFT T-LED profile is installed in the same way as a standard T-profile. KRAFT G-LED luminaires are easily mounted on open cell ceiling grilyato and linear strip ceiling. And KRAFT K-LED lamps can be installed even without fasteners to the ceiling structure.

4. Do not require maintenance. Service life up to 50,000 hours. The parameters of the luminaires are designed in such a way that the LED elements do not overheat. At the same time, the guides of the ceiling structure act as a radiator, dissipating heat into the ceiling space.

5. Do not violate the acoustics of ceiling systems. Often in the classic suspended ceilings acoustic mineral tiles, which are designed to redeem noise are used. Installing raster fixtures in such ceilings violates the acoustic effect of the use of plates. The KRAFT LED lighting system is mounted directly on the T-grid system and does not violate the acoustics of the ceiling.

6. Safety & Warranty. KRAFT LED luminaires do not contain mercury and do not emit ultraviolet light. Warranty 3 years

7. Can be used with any type of ceiling. We produce three types of lamps. The T-Led model is designed for suspended ceilings on T-grid profiles system. The G-Led model can be used for any suspended ceilings: ceilings on T-profiles, for all types of open cell ceilings grilyato, as well as for suspended ceilings made of a cube-shaped or plate-shaped rail. The K-Led model is a full-fledged lamp based on a cube-shaped rail. It can be used not only for suspended ceilings, but as an independent lamp.

Types of lamps and their use: T-Led, G-Led, K-Led

The KRAFT Led lighting system conventionally consists of two parts - the light source (luminaire) and its mount. Luminaires in all systems are the same. And depending on the type of suspended ceiling, we offer three types of mounting: T-Led, G-Led and K-Led.

KRAFT T-Led lamps

In the KRAFT T-Led lighting system, the KRAFT Fortis T-profiles with a width of 15 or 24 mm are used as supporting elements of the luminaire. Profiles with a semicircular diffuser are used with the T-24 system (width 24 mm). Profiles with a rectangular diffuser are intended for use with the T-15 system (width 15 mm). During installation, instead of the usual T-profile, the KRAFT T-Led LED profile is installed in the desired place on the ceiling.

KRAFT G-Led lamps

KRAFT G-Led luminaires are also available in widths of 15 mm (rectangular diffuser) or 24 mm (semicircular diffuser). They are attached directly to the rail or grilyato profiles using reinforced double-sided tape (included). It should be borne in mind that before fastening, it is necessary to drill holes for the output of the wires.

KRAFT K-Led lamps

This system is a full-fledged luminaire based on the KRAFT cube-shaped rail. In this case, the luminaire driver is hidden inside the rail. Thanks to the new type of fastening, such luminaires can be mounted either directly to the ceiling or on any suspensions, including those on their own wires. You can choose any color of the lamp according to the RAL scale, as well as the texture of wood, metal, stone.

Interactive 3D model of the KRAFT Led lamps

KRAFT Led T-15

KRAFT Led T-24

KRAFT Led G-24

KRAFT Led G-15

KRAFT K-Led

Technical characteristics of KRAFT LED lightning system

The KRAFT LED lighting system was patented in Ukraine and abroad and is protected by copyright laws. To avoid fakes, all of our products feature the KRAFT logo.
The LED lighting system KRAFT LED uses components from leading manufacturers such as LG, Samsung, Philips, CREE. The package includes a driver and a choice of either 2 LED lamps with a length of 600 mm or one lamp with a length of 1200 mm. Also, some models of lamps have a length of 1800, 2400 or 3600 mm.

	Set 2 х 600 mm х 15 mm	Set 2 х 600 mm х 24 mm
Body	fully insulated IP20 metal case
Safety glass	lighting acrylic Samsung
Content of harmful substances according to RoHS	does not contain harmful substances according to RoHS
LEDs	Model: SMD 2835-12C7B. Number of LEDs: 2x84 pcs.
Colour temperature	4633 К	4637 К
Light flow	2565 Lm	2812 Lm
Color rendering index, Ra	83,4 Ra	83,8 Ra
Luminous efficiency	93,3 Lm/W	103,4 Lm/W
Scattering angle	120°
Power	27,5 W	27,2 W
Input range stresses	200–240 V, 50/60 Hz
Withstands input voltage fluctuations	up to 300 V
Output current stabilization	yes
Ripple factor	less 1%
Short circuit and overvoltage protection	yes
Power factor, cos φ	0,98	0,94
Efficiency	89%	91%
Electrical safety class	II

* Specifications are indicated for a set of luminaires 1x1200 mm, or 2x600 mm. For the remaining lengths of the luminaires, the characteristics are calculated proportionally

Main characteristics of KRAFT Led lamps